It’s delivered through the Saba platform.

These are Flash-based, with slides, audio, and sometimes PDF attachments. The course is delivered as a series of 10 approximately half-hour modules. It’s light on resource, so you can easily spin up several vRouters. Personally I ran it on VMware Fusion on my laptop. Note that you can run the Vyatta image on a local hypervisor, or if you prefer you can select it from the AWS marketplace.

Links to certification materials and communities.

Access to the “Brocade Certified vRouter Engineer Course.”.

A download link to the Brocade Vyatta 5400 vRouter image.

I.e. it’s primarily about the basics of Vyatta. What’s the Course/Exam About?Īs a Brocade Certified vRouter Engineer, you must be able to demonstrate the ability to install, configure and troubleshoot features of Brocade Vyatta Network OS. These are my opinions, not my employer’s. This entry was posted in IT and tagged BCVRE, brocade, certified, exam, objectives, open source, virtualization on 8 by guldmyr.Disclaimer: I now work for Brocade.

Identify methods to verify operations and troubleshooting.

Identify logging options for firewall and NAT operations.

It is also possible to copy the config elsewhere and reinstall.

Describe the Brocade Vyatta upgrade process.

out – out from the router (matching on source IP).

in – into the router (matching on destination IP).

set interface bonding bond0 firewall in/local/out name.

set firewall name rule 1 destination/source.

Describe firewall operations and troubleshooting using show commands.

Identify configuration of different types of static routes.

Identify show commands for use with routing.

went through how to set up static routes

show dns forwarding # shows cache size for example).

monitor dns forwarding # I could not get anything into the log).

Describe troubleshooting of DNS forwarding.

Describe troubleshooting of DHCP operations.

Demonstrate knowledge of the relationship between Layer 2, IP and TCP/IP.

Demonstrate knowledge of configuration and operation using show commands.

set interface bonding (IP address, mode).

Some features are not allowed for these peth devices though (VLAN, bonding).

set interface pseudo-ethernet # these can be used if you want to set the MAC-address.

This looks like a normal ethernet interface.

set interface ethernet eth0 vif # this creates eth0.

run show – in configurational mode shows status of components.

show – in configurational mode shows the configurations.show – in operational mode shows status of components.1 Brocade Vyatta vRouter System Operations.

Brocade vrouter